C-24.2, r. 3.1 - Approval of the cameras used to photograph the registration plates of road vehicles crossing bridge P-15020 on Autoroute 25

Section 1 Disposition versions

2016-07-23

1. The cameras used to photograph the registration plates of road vehicles crossing bridge P-15020 on Autoroute 25 are approved, the main components of which being as follows:

(a)  fully-redundant zone controller with detection by suspended laser scanner (LMS 211-10100 or LMS 511-10100 by SICK AG) and by magnetic induction loops connected to a detector (SmartToll® by Peek Traffic Corporation or TD724ID by Nortech Detection PTY Ltd.), which is operated by the Idris® technology;

(b)  electronic toll system with radio frequency identification, including in particular outdoor antennas (AA3152 by Transcore or Series 5000 by the 3M Company operated by the Sirit technology), multiprotocol readers (Encompass®6 by Transcore or IDentity 6204 by the 3M Company operated by the Sirit technology) and type B or C transponders meeting ISO/CEI Standard 18000-6, Information technology – Radio frequency identification for item management – Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General, published jointly by the International Organization for Standardization and the International Electrotechnical Commission;

(c)  camera identification system (VIS-CAM 500 3015330 and 3015331 cameras by JAI Inc. or VISIPAK ANPR and VISIPAK ANPR-OV cameras by Survision) and camera monitoring (P1343 or P1353 by Axis or Quasar Quad HD mini-dome camera operated by the DVTEL system of FLIR Systems Inc.).

M.O. 2011-05, s. 1; M.O. 2015-01, s. 1; M.O. 2016-15, s. 1.

2015-03-26

1. The cameras used to photograph the registration plates of road vehicles crossing bridge P-15020 on Autoroute 25, manufactured by Transcore, are approved, the main components of which being as follows:

(a)  fully-redundant zone controller with detection by suspended laser scanner (LMS 211 or LMS 511-10100 by SICK AG) and by magnetic induction loops (SmartToll® by Peek Traffic Corporation and technologie Idris®);

(b)  electronic toll system with identification by radio frequency by Transcore, including in particular antennas (AA3152 by Transcore), multiprotocol readers (Encompass®6 by Transcore) and transponders (eGo Plus by Transcore);

(c)  camera identification system (VIS-CAM 500 3015330 and 3015331 by JAI Inc.) and camera monitoring (P1343 or P1353 by Axis).

M.O. 2011-05, s. 1; M.O. 2015-01, s. 1.

2012-09-01

1. The cameras used to photograph the registration plates of road vehicles crossing bridge P-15020 on Autoroute 25, manufactured by Transcore, are approved, the main components of which being as follows:

(a)  fully-redundant zone controller with detection by suspended laser scanner (LMS 211 by SICK AG) and by magnetic induction loops (SmartToll® by Peek Traffic Corporation and technologie Idris®);

(b)  electronic toll system with identification by radio frequency by Transcore, including in particular antennas (AA3152 by Transcore), multiprotocol readers (Encompass®6 by Transcore) and transponders (eGo Plus by Transcore);

(c)  camera identification system (VIS-CAM 500 3015330 and 3015331 by JAI Inc.) and camera monitoring (P1343 by Axis).

M.O. 2011-05, s. 1.